Lenovo Tab2A7-20F Firmware MT8127 Flash File Read Cm2 (Free)

Death Phone Hang Logo, Done

Blank LCD Fix Done

100% TESTED

MT8127__Lenovo__Tab2A7-20F__Tab2A7-20F__4.4.2__T2-A7-20F_S000009_151022_ROW





Wait for phone...
Phone found! [ 13 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 8127
BB_CPU_NME : [MediaTek] MT8127_S00
BB_CPU_EXT : 0xCA04 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8D
NAND Flash : NOT INSTALLED
eMMC Flash : 15010038575044335200E1FE65F743B7
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , R3DPW
[eMMC] : FLASH_CID : 15010038575044335200E1FE65F743B7
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xE5974B4ADF494A01F737949D3477D835
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

Brand     : Lenovo
ProdName  : Tab2A7-20F
ProdModel : Tab2A7-20F
Device    : Tab2A7-20F
AndroidVer: 4.4.2
MTKxCPU   : MT8127
MTKxPRJ   : T2-A7-20F_S000009_151022_ROW

[Read Ok] : preloader_adam.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT8127 / V1.1.2 / adam / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1536 MiB
Scatter saved to : C:\Users\babu\Desktop\read file\MT8127__Lenovo__Tab2A7-20F__Tab2A7-20F__4.4.2__T2-A7-20F_S000009_151022_ROW\

All done!

Download Here

preloader_adam.bin(119.kb)

Whatsapp+IMO-00971551644035

Skype - dusto_babu

How to Flash Stock Firmware ROM (Flash File)

Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.

Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile.