Wintouch M99 Firmware KT961D_N2_V1.0 Flash File Read Cm2

KT961D_N2_V1.0

2016.0601

MT6580__JTY__M99__M99__5.1__KT961_L1_20160420

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D31364707D017685B9063
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G61ME
[eMMC] : FLASH_CID : 45010053454D31364707D017685B9063
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID    : 0xE5974B4ADADD1B0AE5B1EBF4B4D5066D
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : JTY
ProdName  : M99
ProdModel : M99
Device    : M99
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : KT961_L1_20160420

[Read Ok] : preloader_kt961_hx_m99.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / kt961_hx_m99 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1338 MiB
Scatter saved to : C:\Users\babu\Desktop\read file\MT6580__JTY__M99__M99__5.1__KT961_L1_20160420\

All done!

Done!
Elapsed: 00:08:12
Reconnect Power/Cable!

Download Here

preloader_kt961_hx_m99.bin (122.kb)

Whatsapp+IMO-00971551644035

Skype - dusto_babu

How to Flash Stock Firmware ROM (Flash File)

Step 1: Download and extract the firmware on your computer.

Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.

Step 3: Install the USB Drivers (skip if drivers are already installed).

Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.

Step 5: Connect your Smartphone to the computer using the USB Driver.

Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.

Step 7: Green Ring will appear at the end of successful Flash.

Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile.